These gold-plated FPV SMA/RP-SMA antenna connectors will solve most setup-issues relating to your antenna connections from video equipment such as different brand video receivers and video transmitters. All three connector-types are included and precision manufactured with very tight tolerances, plus they are 100% tested on professional equipment to ensure maximum performance. Set includes a total of 6 connectors, 2 of each SMA/RP-SMA connector-type.
Product Features:
Fixes compatibility issues with FPV SMA/RP-SMA setups
Runs on any frequency (5.8, 2.4, 1.2 GHz) commonly used for FPV
Set includes a total of 3 pairs for a total of 6 connectors
Precision manufactured and 100% tested for performance
High quality gold plated contacts ensure optimum connection
Item ships from USA warehouse
These are genuine FPV Focus 5.8GHz panel-antennas that have been engineered to maintain high video and audio clarity for very long distances (3KM+ with only a 200MW transmitter.) They are rated at 11dB and are typically used for medium to long-range flights, and as such, its important the antenna is pointed in the general direction of the Video Transmitter. Please note that 5.8Ghz is susceptible to Humidity, Obstacles and other RF noise. This can affect the performance of any antenna. These panel-antennas are directional, should be mounted on the receiver only, and should always be pointed at the aircraft when possible. It is best used when combined with a 5.8GHz Clover Leaf Omni-Directional Antenna on the video transmitter.
Product Features:
Very high gain with 11dB of power
Greatly increases video and audio signal
Runs on 5.8 GHz commonly used for FPV
Precision manufactured and 100% tested
Antenna is designed for receiver
High quality ABS housing
Item ships from USA warehouse
Greatly increase usable video/audio range compared to traditional FPV antennas by eliminating cross-polarization interference and producing an Omni-directional atmosphere. These antennas are precision manufactured with very tight tolerances and 100% tested on professional equipment to ensure maximum range and performance. Set includes 3-lobe and 4-lobe skew planar antennas (1 for receiver and 1 for transmitter.) Use the longer 4-lobe for the receiver and the short 3-lobe for the transmitter.
Product Features:
Greatly increases video and audio signal
Runs on 5.8 GHz commonly used for FPV
Circularly polarized for reduced interference
Precision manufactured and 100% tested
High quality semi-rigid cable used
Long 4-lobe is used for receiver
Short 3-lobe is used for transmitter
LHCP (Left Hand Circularly Polarized)
Item ships from USA warehouse